155M SFP Bi-di Single Fiber Transceiver Module 20km to 120km

Overview

Newbridge® The SFP-BIDI transceivers are high performance, cost effective modules supporting dual data-rate of 1.25Gbps/1.0625Gbps and 20km transmission distance with SMF. The transceiver consists of three sections: a FP or a DFB laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472. For further information, please refer to SFP MSA.

​Feature

●Supports 155Mb/s bit rates

●Simplex LC connector

●Hot pluggable

●1310nm FP transmitter,1550nm PIN photo-detector

●1550nm DFB transmitter,1310nm PIN photo-detector

●Applicable for 20km SMF connection

●Digital Diagnostic Monitor Interface

●Low EMI and excellent ESD protection

●Compliant with SFP MSA and SFF-8472

●+3.3V single power supply

●Operating case temperature:

Commercial: -20 to 70 °C

Industrial:-40 to 85 °C

Application Diagram

Dimensions

Specifications

Who We Are?

Shenzhen Newbridge Communication Equipment Co. Ltd (short title: Newbridge) is one High-technology manufacturer and found in 2004, located in Shenzhen .Our product is controlled according to the standard of ISO9001 and FCC and CE etc. we have been absorbed in developing, designing, manufacturing and selling cctv security products and Optical network communication e.g. HD-SDI cameras, HD-SDI transmission, video fiber transmission, Ethernet media converter etc.

About Our Factory

Newbridge based on Shenzhen is certified by ISO9001:2000, we have been founde in 2004 .We have three product lines, and the first line is SMT line (surface Mounting Technology). there are three sets SMT high-speed device , two sets full automatic screen printer and one sets reflow Soldering in this line .daily output is up to 20 million dots per 12 hours. The second line is Plug-in lines. There is one sets Wave Soldering, Shearing machine and full function test equipment. The third line is assembly line, the last heat aging and test are the strictest.